● HIGH SPEED ● HIGH HARDNESS ● HIGH EFFICIENCY
● HIGH SPEED ● HIGH HARDNESS ● HIGH EFFICIENCY
Your location :Home /
Products /
Micro Diameter End Mill /
US＜HRC52 Universal Series /
R0.05 to R0.45
Material: Carbide
Grain size: 0.4μm
No of Flutes: 2F
Coating: AICrTiN
0
DESCRIPTION ▼
2 Flute HRC52 Carbide Micro Ball Endmill
Key Feature：
● Micro Ball Endmill diameter Range: 0.1 mm- 0.9 mm
● Tight tolerance: R±0.003
● Good wear resistance by the AiCrTiN coating.
● Superior surface finish, material processing wider versatility.
Special coating for ultra-microend mills against fragile work material.
Cost-effective at the same time, to ensure a good general cutting performance.
2 Flute Carbide Micro Ball End Mills Drawing :
Model (NO.) | Radius (R) | Flute Length (l) | Flute Diameter (D) | Neck Angle (γ Reference) | Shank Diameter (d) | Full Length (L) |
USB-20010-04042 | R0.05 | 0.15 | 0.1 | 15° | 4 | 45 |
USB-20015-04045 | R0.075 | 0.2 | 0.15 | 15° | 4 | 45 |
USB-20020-04045 | R0.1 | 0.3 | 0.2 | 15° | 4 | 45 |
USB-20030-04045 | R0.15 | 0.45 | 0.3 | 15° | 4 | 45 |
USB-20040-04045 | R0.2 | 0.6 | 0.4 | 15° | 4 | 45 |
USB-20050-04045 | R0.25 | 0.8 | 0.5 | 15° | 4 | 45 |
USB-20060-04045 | R0.3 | 0.9 | 0.6 | 15° | 4 | 45 |
USB-20070-04045 | R0.35 | 1.1 | 0.7 | 15° | 4 | 45 |
USB-20080-04045 | R0.4 | 1.2 | 0.8 | 15° | 4 | 45 |
USB-20090-04045 | R0.45 | 1.4 | 0.9 | 15° | 4 | 45 |
Advantage:
Good Wear resistance and heat resistance- Ultra-fine substrate and new coating layer AICrTiN.
Highly precise measurement.Tight precision tolerance applied to the tools' diameter and radius.
Good chipping resistance: Optimal cutting edge and special treatment on it.
Clients' Good Feedback:
Our Carbide end mill compares with other competitors:
Promotion Policy
Free sample: If clients agree to pay for shipping, a free corner radius end mills sample can be provided.
First order coupon: New clients can enjoy a USD50 discount coupon for the first order if the total Corner Radius End Mills order amount is more than USD500.
Big order discount: Clients can enjoy a 5% discount if the total carbide mill cutter order amount is more than USD5000.
